DIASOLAR® – Mounting system for photovoltaic systems on green roofs
Advantages
- Penetration-free, ballast due to roof greening
- Optimal use of roof area
- No loss of yield due to shading of plants
- Module height lower edge min. 30 cm from substrate
- Snow slides off quickly
- No accumulation heat
- Quick & easy installation
Parts of the photovoltaic system:
- 1 x DiaSolar® console
- Adjustable angles (standard 15°)
- Support profile
- Auxiliary material (screws, profile connectors, clamps)
DIADEM® LAYER BUILD-UP
DIASOLAR® WITH GREEN ROOF
- DIADEM® MAT25 sedum mat
- DIADEM® SEM substrate for extensive green roofs
- DIADEM® DiaSolar® solar panel holder
- DIADEM® VLF-150 filter and separation geotextile
- DiaDrain-25H Flow-delay retention board
- DIADEM® VLU-300 technical protection fleece for extensive roofs
- Root-resistant waterproofing
- Further layer build-up according to architect’s specification
DIASOLAR® WITH GRAVEL ROOF
- Gravel ballast
- DIADEM® DiaSolar® drainage board
- DIADEM® VLF-150 filter geotextile
- Root-resistant waterproofing
- Further layer build-up according to architect’s specification
Parameters
| Size of DiaSolar® console: | 198 x 97 x 6 cm |
| Weight per unit: | 12 kg (Weight without load, without pv-modul) |
| Water storage tank volume: | 43 Liter |
| Compressive strength (unfilled): | > 25 kN/m2 |
| Compressive strength filled (flush filled): | > 70 kN/m2 |
| Water retention capacity: | i = 0,01 (= 1% Gradient) 0,4 l/(m*s) i = 0,01 (= 1% Gradient) 0,4 l/(m*s) i = 0,01 (= 1% Gradient) 1.0 l/(m*s) |
| Material: | Aluminium, magnelis, stainless steel and HDPE |
| Module inclination: | 15° standard (10° or 20° optional)[TÉ1] |
| Ballasting: | The ballast and spacing of the panel must be calculated by DIADEM® in accordance with the Wind Zone Plan. |
| Roof connection: | No structural connection to the roof required |
| Roof inclination: | Maximum 5° |
| Warranty: | 25 years for all aluminium and stainless steel parts |