DiaSafe® Ballasted

DiaSafe® Ballasted systems

The Systems can be installed on green, gritted, or paved roofs, with up to a 5° incline. The key factor is to ensure a minimum ballast weight of 80 kg/m2 for the standard 3m×3m size fall arrest mat. The waterproofing, roof insulation and roof structure remain intact.


DiaSafe® Ballasted Single Solo/Duo
BIM file available!

BIM gomb revittelBIM gomb archicaddelPdfreaders f

DiaSafe® Ballasted Single Solo/Duo
Fall protection system with single anchoring point
  • No thermal bridges ⇒ Junction elements are not neccessary for installation
  • Ballasted ⇒ May be fixed without penetrating the waterproofing membrane
  • Corrosion proof ⇒ Can be installed in coastal regions with salt exposure
    and industrial areas affected by acid rain
  • Multi-user system ⇒ The system can anchor one or two people if ballast
    weight is increased
  • Flexible ⇒ Same system can be used for roof installation and subsequent
    maintenance work
ART130097 DiaSafe SingleSystem Duo
single retegrend

Growing media
DiaSafe® damping plate with integrated damping mat
VLF-150/200 filter layer*
DiaDrain-25H flow-delay retention board*
VLU-300/500 mechanical protection layer
Roof resistant waterproofing membrane
Roof construction

For ensuring the safety of people working at height on flat roofs with up to 5° incline. Can be used both as fall arrest or fall restraint systems.

DiaSafe® Ballasted Single Solo/Duo
CE-marked ballasted safety system against fall, for one (Solo) or for two (Duo) persons, standard EN795:2012 (valid since 31.01.2013) for Solo, and CEN/TS 16415:2012 for Duo, class A certified, as fall arrest or fall restraint system, installed without penetrating the water membrane, with “Amoeba”-shaped damping plate, with integrated DS-Single anchor post of stainless steel that is resistant to acid rain in industrial regions and salt air in coastal regions, with a fibreglass laminated cone and laminated ballasting mat, in signal-green colour, with heightmarking lines for assisting measurement of ballast material in dry conditions at 80 kg/m2 for Solo (with accessory damping mat from 30 kg/m2) or 200 kg/m2 for Duo distributed evenly over the whole ballasting mat surface, supplied as fullyfunctional system ready for immediate professional installation according to the approved implementation plan and laid out using guidelines provided by the manufacturer.

Further information:
DiaSafe® Ballasted Single Solo/Duo: ........... piece

Product: DiaSafe® Ballasted Single Solo/Duo
Producer’s certificate: APP Dachgarten GmbH/APP Kft.
Website: www.diadem.com

PIS jelvenyek CE TUV
Related norms: EN795:2012; CEN/TS 16415:2012; D.A.CH.S directives; ÖNORM B3417
Integrated safety damping mat (m): 3x3**
**Weight of ballast: 80 kg/m2 (Solo); 200 kg/m2 (Duo)
Highest tensile strength on the waterproofing membrane (N/mm2): 0,00155 N/mm2
Multi-user: yes (Duo)
Resistant to salt and acid: yes
Effective in winter conditions (frost, snow): yes

DiaSafe® Ballasted Line Multi
BIM file available!

DiaSafe® Ballasted Glide Solo/Duo
BIM file available!

APP Kft.

H-9028 Győr Fehérvári út 75.

Telefon: +36 96 512 910
Fax: +36 96 512 914
E-mail: info@diadem.com