Fall protection system with multiple anchoring points

DiaSafe® Line Multi

Fall protection system with multiple anchoring points

PRODUCT CODE: 130098 Categories: ,

Advantages

  • No thermal bridges ⇒ Junction elements are not necessary for installation
  • Permanently secured by roof layer ⇒ May be fixed without penetrating the waterproofing membrane
  • Corrosion proof ⇒ Can be installed in coastal regions with salt exposure and industrial areas affected by acid rain
  • Multi-user system ⇒ The system can be used by more than one person at the same time
  • Low load requirements ⇒ from 30 kg of ballast weight per square metre

DIADEM® Build-up

Vegetation
Growing media or gravel
DiaSafe® damping plate with integrated damping mat
* VLF-150/200 filter layer
* DiaDrain-25H flow-delay retention board
VLU-300/VLU-500 protection layer
Root resistant waterproofing membraine
Roof construction

*Optional layer for gravel roof

Application

For ensuring the safety of people working at height on flat roofs with up to 5° incline. Can be used both as fall arrest or fall restraint systems.

Specification

DiaSafe® Line Multi

Permanent anchor device fixed by roof layers as fall arrest and fall restraint system installed without penetrating the waterproofing membrane, with a stainless steel anchoring wire (8mm) parallel with the roof edge, for 1+1 users simultaneously in every other fields, as fall restraint system for one user and as fall arrest system for the other user, according to the standards EN 795:2012 class C and CEN/TS 16415:2013 certified, for flat roofs with a slope up to 5°, incl. all accessories made of stainless steel resistant to acidic environments and salt air in coastal regions, with DS amoeba-damping plate with laminated ballasting mat in signal green colour, and a fibreglass reinforced support cone, with marking lines for the min. ballasting height, supplied as fully functional system ready for immediate professional installation according to manufacturer’s instructions, to the technical building regulations and to the approved implementation plan, assembled according to guidelines provided by the manufacturer with ballast material in dry conditions at 80 kg/m2 distributed over the whole ballasting surface.

Further information:

DiaSafe® Line Multi anchor post, DS amoeba damping plate with GFK-cone and damping mat: ……….. piece,
FGL-50 stainless steel wire rope length: approx. ………… lm

Product: DiaSafe® Line Multi
Producer’s certificate: APP Dachgarten GmbH/APP Kft.
Website: www.diadem.com

Technical data

Relevant standards: EN795:2012; D.A.CH.S directives; ÖNORM B3417
Integrated safety damping mat (m): 3×3
Weight of ballast: 80 kg/m2
Highest tensile strength on the waterproofing membrane (N/mm2): 0,00155 N/mm2
Multi-user: yes
Resistant to salt and acid: yes
Effective in winter conditions (frost, snow): yes

Vegye fel velünk a kapcsolatot!

    * Required fields